ValueRAM's KVR26N19D8/16 is a 2G x 64-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 2Rx8, memory module, based on sixteen 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. 

Features

• Power Supply: VDD=1.2V Typical
• VDDQ = 1.2V Typical
• VPP – 2.5V Typical
• VDDSPD=2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Dual-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 16 internal banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.23” (31.25mm)
• RoHS Compliant and Halogen-Free

Description

Specification

• Series: Kingston ValueRAM
• DDR Type: DDR4
• Size: 1 x 16GB
• #Hide#Individual Module Size: 16GB
• #Hide#Total Capacity: 16GB Total
• Speed: 2666 MHz
• Compliance: PC4-21330
• Pins: 288-pin
• CAS Latency: CL19
• Data Integrity Check: Non-ECC
• Low Voltage: No
• Voltage: 1.2V Typical
• Timings: 19-19-19
• Heatsink: No
• #Hide#LED Lighting: No
• Additional Information: See Overview
• Package Type: Blister Pack
• Package Weight: 0.0225 kg
• Warranty: Lifetime